Installing a 3.5-inch peripheral drive – NCR S26 User Manual
Page 51
Advertising
Installing Drives
NCR S26 Hot Plug Server User Guide
3-19
Installing a 3.5-inch Peripheral Drive
To install a 3.5-inch peripheral drive, follow these steps:
1. Remove the screw attaching the 3.5-inch drive frame to the housing.
2. Secure the drive on the drive frame.
Figure 3-9. Securing the Drive on the Frame
3. Insert the drive into the third drive bay.
4. Secure it with a screw.
5. Connect the drive cables.
Advertising