NCR S26 - Manual (Page 130)

Sample Standard Configuration
C-12 Sample Configurations
IDE HDD Interface [Disabled]
Parallel Port [Enabled as LPT1 (3BCh)]
Serial Port
Select COM1 Port Address [3F8h]
Select COM2 Port Address [2F8h]
PCI 1 - PCI Ethernet CControl [Auto Added]
PCI Function 1 [Enabled]
PCI 2 - PCI Token Ring [Auto Added]
PCI Function 1 [Enabled]
Embedded - PCI SCSI [Auto Added]
PCI Function 1 [Enabled]
Embedded - PCI VGA [Auto Added]
PCI Function 1 [Enabled]
Standard VGA Resources [Enabled]
*Note: If a PCI adapter is configured in the system, it will be displayed in
one of the PCI slots. Select [F6] to configure the interrupt.
4. Exit and save the configuration.
The server is now set up, configured, and ready for the operating system.