NCR S26 - Manual (Page 77)

Power Saving Configuration
NCR S26 Hot Plug Server User Guide 4-21
Power Saving Configuration
The Power Saving Configuration parameters permit you to configure the
system power management feature.
The figure below shows the Power Saving Configuration parameters and their
default settings.
Figure 4-8. Power Saving Configuration
Power Saving Configuration
System Wake Up Events
IRQ 0
IRQ 1
IRQ 3
IRQ 4
IRQ 5
IRQ 6
IRQ 7 IRQ 8
IRQ 9
IRQ 10
IRQ 11
IRQ 12
IRQ 13
IRQ 14
IRQ 15 [ Disabled ] *
[ Enabled ] *
[ Disabled ]
[ Disabled ]
[ Disabled ]
[ Enabled ] *
[ Disabled ] . . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . . . . . .
. . . .
. . .
. . .
. . .
. . .
. . .
. . .
[ Disabled ]
[ Disabled ]
[ Disabled ]
[ Disabled ]
[ Enabled ] *
[ Disabled ]
[ Enabled ] *
[ Disabled ]
Power Management Mode
IDE Hard Disk Standby Timer
System Suspend Timer
[ Disabled ]
[ OFF ]
[ OFF ] . . . . . . . . . . .
. . . .
. . . . . . . . .
= Move Highlight Bar,
PgDn/PgUp = Move Screen, F1 = Help, Esc = Exit
= Change setting,
Page 1/1
Note: The grayed items (here denoted with asterisks) have fixed settings and
are not user-configurable.
Power Management Mode
This parameter permits you to reduce power consumption. When it is set to
Enabled, you can configure the monitor power-saving timer, IDE hard disk
standby timer, and the system suspend timer. The following sections describe
the timers.