Terminal panel – NEC DT100 User Manual
Page 16
E-11
Part Names and Functions
■ Terminal panel
PC video input
PC video output
PC audio input
Video Source audio inputs
Video Source video input
S-video video input
Audio output
Test (maintenance) input/output
R
L
V
OUT
IN
PC-AUDIO
VIDEO-IN
S-VIDEO
TEST
PC-OUT
PC-IN
S-video
video input
Video Source
audio inputs
Video Source
video input
PC audio
input
Audio output
PC video
output
Test (maintenance)
input/output
PC video
input
PC analog RGB input terminal
Connector for outputting input video images as-is. Video images are
output when the lamp is [ON] or during standby.
PC audio input terminal (stereo).
Video Source audio input terminal (stereo).
Video Source (NTSC, PAL or SECAM) input terminal
S-video (Y/C separation) input terminal
DT100 stereo audio output terminal
This stereo mini-jack outputs the currently selected audio source
(PC or video source). Audio is output from PC during standby.
Audio is output from PC when OHP is selected.
Input/output terminal used only for maintenance and test exclusively.
Service only.