NEC DT100 - Manual (Page 36)

E-31
Operation
■ PC Zoom
This function is valid only for PCs.
The zoom function can be executed by the remote control.
1
Select the external input device.
Press the PC (Personal Computer) button for the input device.
The display of the PC input image appears.
* You can select the external input device by DT100 and
Remote Control.
2
Select the magnification.
You can select the magnification using by the ZOOM buttons
on the remote control.
Press the
button to increase the magnification up to x4.
Press the button to return the magnification to x1.
* You can adjust the zoom (magnification) arbitrarily up to x4
(four times).
3
Move the zooming area.
You can move the zooming area by using arrow buttons on the
remote control.
button : moves upwards
button : moves downwards
button : moves to the left.
button : moves to the right.
In the zooming area, some blanks may appear on the above,
below, to the left or to the right of the input PC signals.
Main control
OHP PC VIDEO
Remote control
OHP PC VIDEO
Remote control
ZOOM
Remote control