NEC DT100 - Manual (Page 23)

E-18
■ Typical Installation
1. Determine where to set up your projector and screen.
Set up your projector on a strong and stable surface that is as level as possible.
2. Connect the supplied power cable and press the
ON/STANDBY
button (or ON/
STANDBY
button.)
3. Position your projector so that the screen is at a right angle to the
center line of the projector lens.
Move your projector horizontally so that the top and bottom lines of the image projected
on the screen are straight and parallel to each other.
4. Adjust the adjustable feet to tilt your projector to achieve the desired
projector height. (The tilt can be adjusted from 0
° to 7°.)
Adjusting the tilt changes the vertical position of the image projected on the screen.
;;
;;
;;
;;
;;
90°
;;
;;
;;
;;
;;
Adjustable feet
;;
;;
;;
;;
;;
;;
;;