NEC DT100 - Manual (Page 19)

E-14
Remote Control
ON/STANDBY button
Select buttons (OHP/PC/VIDEO)
MENU button
SET button
/ /t /s buttons
ZOOM buttons
Brightness control buttons
Volume control buttons
AUTO SYNC button
KEY STONE button
• Turns the projector lamp ON/OFF.
• Only this button is valid when the projector lamp is turned OFF.
• Images from the PC INPUT connector are projected when PC is
selected, images from the VIDEO INPUT when VIDEO is se-
lected, and materials or printed matter placed on the projector are
projected when OHP is selected.
• This button shows the MENU display.
• The same settings as from the operation panel are available using
MENU items.
• Press to fix each menu item.
• Use these buttons to change items, adjust values, or select items
in the MENU display.
• Use these buttons to scroll the zoom display in the PC ZOOM display.
• These buttons adjust the OHP magnification in the OHP mode.
• Adjusts the magnification of the PC in the PC mode.
The left button reduces the image, while the right button enlarges
the image.
• These buttons adjust the OHP brightness.
The left button makes the image darker, while the right button
makes the image brighter.
• These buttons adjust the volume in the PC and the VIDEO modes.
The left button turns down the volume, while the right button turns
up the volume.
• This button performs synchronizing automatically. (Valid when PC/
VIDEO is selected.)
• These buttons compensate keystoning.
OHP
ON/
STANDBY
AUTO
SYNC
PC VIDEO
MENU SET
ZOOM
BRIGHT
KEYSTONE VOLUME
MENU button
ON/STANDBY button
AUTO SYNC button
KEYSTONE button
/ / / buttons
Select buttons
(OHP/PC/VIDEO)
SET button
ZOOM buttons
Brightness control buttons
Volume control buttons