NEC DT100 - Manual (Page 25)

E-20
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11
About the PC INPUT and OUTPUT connectors
A 15-pin mini D-SUB connector is used as the PC INPUT and OUTPUT terminals. The
following shows the correspondence between pins and signals.
1 RED VIDEO 6 GND 11 GND
2 GREEN VIDEO 7 GND 12 ----
3 BLUE VIDEO 8 GND 13 H.SYNC
4 GND 9 ---- 14 V.SYNC
5 ---- 10 GND 15 ----
NOTE
• The 15-pin RGB input and output connectors on your projector are for analog signals and cannot be connected to
a PC supporting only a digital signal output.