NEC DT100 - Manual (Page 35)

E-30
4
Compensating keystoning.
Refer to “Compensating keystoning” on page E-32.
Remote control
KEYSTONE
Document Direction and Scan Size
Place materials or printed matter in the following direction.
The maximum scan size of materials or printed matter is 216 mm/8.5" (vertical) by 288 mm/
11.3" (horizontal). When an A4-size document is placed in the projector, the scan sizes are as
follows (the shaded section shows the area of the materials that is projected, or the "scan
area".)
*1 If you align the paper with the material scan line, it is easy to align with the center.
When A4-size (portrait) materials are placed
on the scanner, the screen can be effectively
used by increasing the magnification. The area outside the scan area is not
projected on the screen. To project this area,
shift the paper.
297mm/11.7" (paper size)
288mm/11.3" (scan size)
210mm (paper size) 216mm (scan size)
A4-size paper (landscape)
288mm/11.3" (scan size)
210mm/8.3" (paper size)
216mm (scan size)
297mm (paper size)
A4-size paper (portrait)
*1