NEC N8406-022A - Manual (Page 18)

Browser-based interface 18
3. Select the corresponding radio button to assign the VLAN to a Port Group.
4. Click Apply to make the changes active.
Management
On the BBI, choose System Settings > Management to configure SNMP System Settings and System Log Server
Settings.
The following table describes the management configuration.
Table 8 Management
Command Description
SNMP System Settings
System Name Configures the name for the system. The name can have a maximum of 64
characters.
System Contact Configures the name of the system contact. The contact can have a maximum
of 64 characters.
System Location Configures the name of the system location. The location can have a maximum
of 64 characters.
System Log Server Settings
IP Address of Primary Server Sets the IP address of the primary syslog server.
Severity of Primary Server This option sets the severity level of the primary syslog server displayed. The
default is 7, which means log all the seven severity levels.
Facility of Primary Server This option sets the facility level of the primary syslog server displayed. The
default is 0.
IP Address of Secondary Server Sets the IP address of the secondary syslog server.
Severity of Secondary Server This option sets the severity level of the secondary syslog server displayed.
The default is 7, which means, log all seven severity levels.