NEC N8406-022A - Manual (Page 34)

Command Line Interface 34
SNMPv3 Access Table information
Command: /info/sys/snmpv3/access
Group Name Model Level ReadV WriteV NotifyV
---------- ------- ------------ --------- -------- -------
v1v2grp snmpv1 noAuthNoPriv iso iso v1v2only
admingrp usm authPriv iso iso iso
The access control sub system provides authorization services.
The vacmAccessTable maps a group name, security information, a context, and a message type, which could be
the read or write type of operation or notification into a MIB view.
The View-based Access Control Model defines a set of services that an application can use for checking access
rights of a group. This group’s access rights are determined by a read-view, a write-view, and a notify-view. The
read-view represents the set of object instances authorized for the group while reading the objects. The write-view
represents the set of object instances authorized for the group when writing objects. The notify-view represents the
set of object instances authorized for the group when sending a notification.
The following table describes the SNMPv3 Access Table information.
Table 20 SNMPv3 Access Table parameters
Field Description
Group Name Displays the name of group.
Model Displays the security model used, for example, SNMPv1, or SNMPv2 or USM.
Level Displays the minimum level of security required to gain rights of access. For example,
noAuthNoPriv, authNoPriv, or auth-Priv.
ReadV Displays the MIB view to which this entry authorizes the read access.
WriteV Displays the MIB view to which this entry authorizes the write access.
NotifyV Displays the Notify view to which this entry authorizes the notify access.
SNMPv3 Group Table information
Command: /info/sys/snmpv3/group
Sec Model User Name Group Name
---------- ----------------------------- -------------------------------
snmpv1 v1v2only v1v2grp
usm adminmd5 admingrp
usm adminsha admingrp
A group is a combination of security model and security name that defines the access rights assigned to all the
security names belonging to that group. The group is identified by a group name.
The following table describes the SNMPv3 Group Table information.
Table 21 SNMPv3 Group Table parameters
Field Description
Sec Model Displays the security model used, which is any one of: USM, SNMPv1, SNMPv2, and SNMPv3.
User Name Displays the name for the user.
Group Name Displays the access name of the group.
SNMPv3 Community Table information
Command: /info/sys/snmpv3/comm
Index Name User Name Tag
---------- ---------- -------------------- ----------
trap1 public v1v2only v1v2trap
This command displays the community table information stored in the SNMP engine.
The following table describes the SNMPv3 Community Table information.
Table 22 SNMPv3 Community Table parameters
Field Description
Index Displays the unique index value of a row in this table.