NEC N8406-022A - Manual (Page 30)

Command Line Interface 30
Command line interface shortcuts
The following shortcuts allow you to enter commands quickly and easily.
Command stacking
As a shortcut, you can type multiple commands on a single line, separated by forward slashes (/). You can connect
as many commands as required to access the menu option that you want.
For example, the keyboard shortcut to access the Simple Network Management Protocol (SNMP) Configuration
Menu from the Main# prompt is:
Main# cfg/sys/ssnmp/name
Command abbreviation
Most commands can be abbreviated by entering the first characters that distinguish the command from the others
in the same menu or submenu.
For example, the command shown above could also be entered as:
Main# c/sys/ssn/n
Tab completion
By entering the first letter of a command at any menu prompt and pressing the Tab key, the CLI will display all
commands or options in that menu that begin with that letter. Entering additional letters will further refine the list of
commands or options displayed.
If only one command fits the input text when the Tab key is pressed, that command will be supplied on the
command line, waiting to be entered. If the Tab key is pressed without any input on the command line, the currently
active menu displays.