NEC N8406-022A - Manual (Page 43)

Command Line Interface 43
IP information
Command: /info/l3/ip
Interface information:
1: 47.80.23.243 255.255.254.0 47.80.23.255, vlan 1, up
Default gateway information: metric strict
4: 47.80.23.254, vlan 4095, up active
The following interface and default gateway information is displayed:
• Interface
number
• IP
address
• IP
mask
•
IP broadcast address
• Operational
status
IGMP multicast group information
Command: /info/l3/igmp
[IGMP Multicast Group Menu]
mrouter - Show IGMP Snooping Multicast Router Port information
find - Show a single group by IP group address
vlan - Show groups on a single vlan
port - Show groups on a single port
trunk - Show groups on a single trunk
dump - Show all groups
The following table describes the commands used to display information about IGMP groups learned by the switch.
Table 32 IGMP Multicast Group menu options
Command Usage
mrouter Displays the Multicast Router Menu.
find <IP address> Displays a single IGMP multicast group by its IP address.
vlan <1-4094> Displays all IGMP multicast groups on a single VLAN.
port <port number> Displays all IGMP multicast groups on a single port.
trunk <1-40> Displays all IGMP multicast groups on a single trunk group.
dump Displays information for all multicast groups.
IGMP multicast router port information
Command: /info/l3/igmp/mrouter
[IGMP Multicast Router Menu]
vlan - Show all multicast router ports on a single vlan
dump - Show all multicast router ports
The following table describes the commands used to display information about multicast routers learned through
IGMP Snooping.
Table 33 IGMP Multicast Router menu options
Command Usage
vlan <1-4094> Displays information for all multicast groups on a single VLAN.
dump Displays information for all multicast groups learned by the switch.