NEC DSX 1093099 - Manual (Page 139)

Removing Lines and Extensions from Service
DSX Feature Handbook Features ◆ 131
Features
Removing Lines and Extensions from Service
Description
Supervisors and attendants can remove problem lines and extensions from service. This helps ensure maxi-
mum system performance. For example, the attendant can busy-out a noisy line or problem extension until
service personnel can repair the problem. The line or extension the appears busy to all callers. Following
repair, the attendant or supervisor can return the line to service.
Operation
Temporarily remove problem extensions and lines from service until they can be repaired.
Removing Lines and Extensions from Service
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To remove or return an extension or line to service:
1. Press INTERCOM .
2. Dial #40 .
3. Do one of the following.
a. Dial the number of the extension you want to remove or return to service (e.g., 302).
b. Dial the extension number of the line you want to remove from service (e.g., 101 for line 1).
4. Do one of the following.
a. Dial 4 to return the line or extension to service.
b.
Dial 6 to remove the line or extension from service.
• At the extension removed from service, you see Out of Service .
• The line key for a line removed from service will be on (red).
5. Press SPEAKER to hang up.