NEC DSX 1093099 - Manual (Page 148)

Selectable Display Messaging
140 ◆ Features DSX Feature Handbook
Operation
Setting Up Selectable Display Messaging
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To select a Selectable Display Message:
1. Select the Call Forwarding options.
[Menu + Call Forward]
[Menu + Cfwd] Alternately do one of the following:
• Press INTERCOM and dial *3 .
• Press your Call Forwarding Feature Key.
2. Select Selectable Display Messaging.
[None]
[MORE + MORE + None] Select to cancel Call Forwarding and Selectable Display Messaging.
• Alternately dial 0 .
[Message]
[MORE + Msg] Select to set up Selectable Display Messaging.
• Alternately dial 8 .
• Skip to Selectable Display Messaging (page 139) for more.
3. Do one of the following.
a. Dial the message number (01-16).
b. Press Volume Up or Volume Down to scroll through the message numbers.
4. Press HOLD . The selected message displays.
5. Do one of the following.
a. Press Volume Up or Volume Down to scroll through the available messages.
b. Press HOLD to program or append the message text.
6. Enter any additional digits.
• The total of all digits and characters cannot exceed 20.
• See the Name Programming Chart on the next page when entering additional data.
• You cannot add additional digits to a blank (unprogrammed) message.
7. Press HOLD .