NEC DSX 1093099 - Manual (Page 77)

Extension Locking
DSX Feature Handbook Features ◆ 69
Features
4. When you see NEW PIN ACCEPTED :
[Exit]
[Exit]
To change your PIN number (if you already have one assigned):
1. Press INTERCOM and dial ##6 .
2. When you see ENTER PIN CODE:
• Enter your current PIN number + HOLD .
3. When you see ENTER NEW PIN:
• Enter your new PIN number + HOLD .
• When entering your PIN number:
- CLEAR erases your entire entry.
- REDIAL backspaces over (erases) the last digit entered.
4. When you see REENTER NEW PIN:
• Confirm your entry by reentering your new PIN number.
5. When you see NEW PIN ACCEPTED :
[Exit]
[Exit] Select to exit PIN number programming.
Unlocking an Extension from the Attendant’s Phone
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To unlock an extension (and clear the extension’s PIN number) from the attendant’s phone:
1. Press INTERCOM and dial ##3 .
• You must have a PIN number entered for your phone to use this feature.
2. When you see ENTER PIN CODE :
• Enter your PIN number + HOLD .
3. When you see ENTER EXTENSION :
• Enter the number of the extension you want to unlock + HOLD .
4. When you see CLEAR PIN: xxx , do one of the following:
[YES]
[YES] Select to unlock the extension entered in step 3 above.
[NO]
[NO] Select to back up to step 2 without unlocking.
Entering or Changing Your PIN Number
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]