NEC DSX 1093099 - Manual (Page 23)

Auto Redial
DSX Feature Handbook Features ◆ 15
Features
Auto Redial
Description
Auto Redial periodically redials a busy outside number. If a keyset user places an outside call and the call
recipient is busy, the user can press a soft key to enable Auto Redial. The keyset user doesn’t have to retry
the number, hoping it will go through.
Auto Redial will periodically retry the number up to 15 times. Auto Redial cancels when the called party
rings or answers, or when the extension:
❥ Places or answers another outside call.
❥ Receives an Intercom voice announcement or answers an Intercom call by lifting the handset or pressing
SPEAKER .
❥ Presses SPEAKER to cancel Auto Redial.
❥ Presses any other fixed feature key except MIC .
❥ Lifts and replaces the handset.
❥ Presses the CANCEL soft key (Super Display only).
Operation
Instead of redialing, have Auto Redial periodically retry a busy outside number.
Auto Redial
[Super Display Soft Key] - [Keyset Soft Key]
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To enable Auto Redial:
1. Place an outside call and receive busy tone.
2. [Auto Redial]
[Alnd] Press to enable Auto Redial.
• The system enables Auto Redial for the last outside call you dialed.
You see: WAITING (30 SEC)
AUTO REDIAL 1 OF 15 The display shows the interval between callout attempts (e.g., 30 seconds), as
well as how many times redial has occurred (e.g., 1 of 15).
• SPEAKER winks when your telephone has Auto Redial enabled.
3. The system periodically redials the call, up to 15 times.
Auto Redial cancels when you:
• Place or answer another outside call.
• Receive an Intercom voice announcement or answer an Intercom call by lifting the handset or
pressing SPEAKER .
• Press SPEAKER to cancel Auto Redial.
• Lift and replace the handset.
• Press the
CANCEL soft key (Super Display only).
If a Caller ID call rings while Auto Redial is enabled, your display will show the number and optional
name of the incoming caller. However, the ringing does not cancel Auto Redial. In addition, the Auto
Redial display will be restored after the Caller ID call stops ringing.