Central office calls, placing – NEC DSX 1093099 User Manual
Page 43
Central Office Calls, Placing
DSX Feature Handbook
Features
◆ 35
Features
Using Store and Forward
Feature Name
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To place an outside call using Store and Forward:
1.
Do one of the following.
a.
Press
INTERCOM
and dial
9
.
• You may optionally be able to dial
90
-
98
.
b.
Press a Switched Loop key + Dial Line Group number (
90-98
).
c.
Press Fixed Loop key.
2.
Dial the outside telephone number.
3.
When you have finished dialing, wait 6 seconds or dial
#
for the call to go though,
• The stored number dials out.
Using Store and Forward and Account Codes
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To place an outside call when both Store and Forward and Account Codes are enabled:
• With Forced Account Codes for Toll Calls Only, you do not have to enter an Account Code for local calls. Just dial
the call normally.
1.
Do one of the following.
a.
Press
INTERCOM
and dial
9
(or optionally
90
-
98
).
b.
Press Switched Loop key + Dial the Line Group number (
90
-
98)
.
c.
Press Fixed Loop key.
2.
Dial the outside telephone number.
3.
Do one of the following.
a.
Wait for three beeps (Forced Account Codes only).
b.
[Account Code]
[ACCT]
Select Account Code soft key.
c.
Press your Account Code Feature Key.
4.
Enter the Account Code.
5.
Do one of the following.
a.
Wait 6 seconds.
b.
[Account Code]
[ACCT]
Select Account Code soft key.
c.
Press your Account Code Feature Key.
d.
Dial #.