NEC DSX 1093099 - Manual (Page 187)

Walking Class of Service
DSX Feature Handbook Features ◆ 179
Features
Entering or Changing Your PIN Number
In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]
To enter your PIN number (if you don’t have one assigned):
1. Press INTERCOM and dial ##6 .
2. When you see ENTER NEW PIN:
• Enter your new PIN number + HOLD .
• When entering your PIN number:
- CLEAR erases your entire entry.
- REDIAL backspaces over (erases) the last digit entered.
3. When you see
REENTER NEW PIN:
• Confirm your entry by reentering your new PIN number.
4. When you see NEW PIN ACCEPTED :
[Exit]
[Exit]
To change your PIN number (if you already have one assigned):
1. Press INTERCOM and dial ##6 .
2. When you see ENTER PIN CODE:
• Enter your current PIN number + HOLD .
3. When you see
ENTER NEW PIN:
• Enter your new PIN number + HOLD .
• When entering your PIN number:
- CLEAR erases your entire entry.
- REDIAL backspaces over (erases) the last digit entered.
4. When you see REENTER NEW PIN:
• Confirm your entry by reentering your new PIN number.
5. When you see NEW PIN ACCEPTED :
[Exit]
[Exit] Select to exit PIN number programming.