User programmable features, Operation – NEC DSX 1093099 User Manual
Page 174
User Programmable Features
166
◆ Features
DSX Feature Handbook
Operation
See the Operation heading in the above table.
Ringing Line Preference
#RLP
#757
#RLP
+
Y
to enable or
N
to disable +
SPEAKER
to exit.
2-5
Speed Dial, Personal
#SP
#77
#SP
+ Press bin key (for bins 701-710) or dial
the bin key (701-720) +
HOLD
+ Dial outside
line (e.g., 1), Line group (e.g., 90-98), or
ICM
for Intercom feature +
HOLD
+ Number to store
+
HOLD
twice + Name +
HOLD
+ Press another
bin key or
SPEAKER
to exit.
1-5
Speed Dial, System
#SP
#77
#SP
+ Dial System Speed Dial bin number
(e.g., 201) +
HOLD
+ Dial outside line (e.g., 1),
Line group (e.g., 90-98), or
INTERCOM
for
Intercom feature +
HOLD
+ Number to store +
HOLD
twice + Name +
HOLD
+ Dial another
System Speed Dial bin or
SPEAKER
to exit.
4 and 5
System Program Access
#*#*
#*#*
+ Enter programming password
3-5
Time and Date
#TD
#83
#TD
+ Enter time in 24-hour clock using hours
(2 digits), minutes (2 digits) and seconds (2 dig-
its) +
HOLD
+ Enter date using month (2 digits),
day (2 digits) and year (4 digits) +
HOLD
+
SPEAKER
to exit.
4 and 5
Intercom Voice Announce
(for incoming Intercom
calls)
#VA
#82
#VA
+
V
for voice announce or
R
for ring +
SPEAKER
to exit.
3-5
User Programmable Features
To program a feature, press
#
and the feature’s code. For example, to enable incoming Paging, press
#
and dial
V
P
Y
, then
SPEAKER
to hang up. By default, Call Forwarding Clear All, System Speed Dial, and Time and Date are only available to
the attendant.
Feature
Mnemonic
Numeric
Operation
Access Level