NEC NP410 - Manual (Page 100)

91
7. Appendix
Input Current NP610: 3.8–1.5A
NP510/NP410/NP405/NP310/NP305: 3.2–1.4A
NP610G: 1.8A
NP510G/NP410G/NP310G/NP405G/NP305G:
1.5A NP510W/NP410W: 3.8–1.5A
NP510WG/NP410WG: 1.8A
Power Consumption NP610: 312W(100-130V AC)/294W(200-240V
AC) in OFF for ECO MODE/237W(100-130V
AC)/228W(200-240V AC) in ON for ECO MODE
NP510/NP410/NP310/NP405/NP305: 251W(100-
130V AC)/239W(200-240V AC) in OFF for ECO
MODE/203W(100-130V AC)/195W(200-240V AC)
in ON for ECO MODE
NP610/NP510/NP410/NP310: 10W in NORMAL
Mode for STANDBY MODE/0.6W(100-130V
AC)/0.7W(200-240V AC) in POWER-SAVING Mode
for STANDBY MODE
NP405/NP305: 8W in NORMAL Mode for STANDBY
MODE/0.6W(100-130V AC)/0.7W(200-240V AC) in
POWER-SAVING Mode for STANDBY MODE NP510W/NP410W: 312W(100-130V AC)/294W(200-
240V AC) in OFF for ECO MODE/237W(100-130V
AC)/228W(200-240V AC) in ON for ECO MODE
1 0 W i n N O R M A L M o d e fo r S TA N D B Y
MODE/0.6W(100-130V AC)/0.7W(200-240V AC)
in POWER-SAVING Mode for STANDBY MODE
*4 What is HDCP/HDCP technology?
HDCP is an acronym for High-bandwidth Digital Content Protection. High bandwidth Digital Content
Protection (HDCP) is a system for preventing illegal copying of video data sent over a Digital Visual
Interface (DVI).
If you are unable to view material via the DVI input, this does not necessarily mean the projector
is not functioning properly. With the implementation of HDCP, there may be cases in which certain
content is protected with HDCP and might not be displayed due to the decision/intention of the HDCP
community (Digital Content Protection, LLC).
*5 An image with higher or lower resolution than the projector’s native resolution (NP610/NP510/NP410/
NP405/NP310/NP305: 1024 × 768 / NP510W/NP410W: 1280 × 800) will be displayed with Advanced
AccuBlend.
Mechanical
Installation Orientation: Desktop/Front, Desktop/Rear, Ceiling/Front, Ceiling/Rear
Dimensions 12.1" (W) × 3.7" (H) × 10.3" (D) /308 mm (W) × 93.5 mm (H) × 262 mm (D)
(not including protrusions)
Weight NP610/NP510: 6.59 lbs/2.99 kg
NP410/NP310: 6.61 lbs/3.0 kg
NP405/NP305: 6.59 lbs/2.97 kg NP510W/NP410W: 6.59 lbs/2.99 kg
Environmental
Considerations Operational Temperatures : 41° to 104°F (5° to 40°C),
(ECO mode selected automatically at 95°F to 104°F/35°C to 40°C)
20% to 80% humidity (non-condensing)
Storage Temperatures : 14° to 122°F (-10° to 50°C),
20% to 80% humidity (non-condensing)
Regulations UL/C-UL Approved (UL 60950-1, CSA 60950-1)
Meets DOC Canada Class B requirements
Meets FCC Class B requirements
Meets AS/NZS CISPR.22 Class B
Meets EMC Directive (EN55022, EN55024, EN61000-3-2, EN61000-3-3)
Meets Low Voltage Directive (EN60950-1, TÜV GS Approved)