NEC NP410 - Manual (Page 87)

78
5. Using On-Screen Menu
7 Menu Descriptions & Functions [INFO.]
Displays the status of the current signal and lamp usage. This item has four pages (three pages on NP405 and NP305).
The information included is as follows:
TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items.
[USAGE TIME]
[LAMP LIFE REMAINING] (%)*
[LAMP HOURS USED] (H)
[FILTER HOURS USED] (H)
[TOTAL CARBON SAVINGS] (kg-CO2)
* The progress indicator shows the percentage of remaining bulb life.
The value informs you of the amount of lamp usage. When the remaining lamp time reaches 0, the LAMP LIFE
REMAINING bar indicator changes from 0% to 100 Hours and starts counting down.
If the remaining lamp time reaches 0 hours, the projector will not turn on regardless of whether the ECO MODE
is set to OFF or ON.
• The message to the effect that the lamp or the filters should be replaced will be displayed for one minute when
the projector is turned on and when the POWER button on the projector or the remote control is pressed.
To dismiss this message, press any button on the projector or the remote control.
Lamp life(H)
Replacement lamp Model ECO MODE
OFF ON
4000 5000
NP07LP NP610/NP510W/NP410W/NP610S/NP510WS
NP14LP NP510/NP410/NP405/NP310/NP305
• [TOTAL CARBON SAVINGS]
This displays the estimated carbon saving information in kg. The carbon footprint factor in the carbon saving cal-
culation is based on the OECD (2008 Edition).