NEC NP410 - Manual (Page 34)

25
2. Installation and Connections
Connecting the Supplied Power Cable
Connect the supplied power cable to the projector.
First connect the supplied power cable’s two-pin plug to the AC IN of the projector, and then connect the other plug
of the supplied power cable in the wall outlet.
CAUTION:
Do not try to touch the ventilation outlet on the left front (when seen from the front) as it can become heated while
the projector is turned on and immediately after the projector is turned off.
MEN U
EXIT
ENT
ER
ST ATU S
LA MP
AUT OAD J.
SOU RC E
FOC
US
Make sure that the prongs are fully inserted into both
the AC IN and the wall outlet.
To wall outlet ←