NEC NP410 - Manual (Page 68)

59
5. Using On-Screen Menu
SETUP
INSTALLATION
ORIENTATION
DESKTOP
FRONT
DESKTOP FRONT, CEILING REAR, DESKTOP REAR,
CEILING FRONT
CONTROL PANEL LOCK OFF OFF, ON
SECURITY OFF OFF, ON
COMMUNICATION SPEED 19200bps 4800bps, 9600bps, 19200bps
CONTROL ID
CONTROL ID
NUMBER
1 1–254
CONTROL ID OFF OFF, ON
OPTIONS(1)
AUTO ADJUST NORMAL OFF, NORMAL, FINE
FAN MODE AUTO AUTO, HIGH, HIGH ALTITUDE
SIGNAL
SELECT
COMPUTER1
RGB/
COMPONENT
RGB/COMPONENT, RGB, COMPONENT
COMPUTER2
(ANALOG)*
1
RGB/
COMPONENT
RGB/COMPONENT, RGB, COMPONENT
VIDEO AUTO
AUTO, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N,
PAL60, SECAM
S-VIDEO AUTO
AUTO, NTSC3.58, NTSC4.43, PAL, PAL-M, PAL-N,
PAL60, SECAM
WXGA MODE
NP610/NP510/
NP410/NP405/
NP310/NP305/
NP610S: OFF
NP510W/
NP410W/
NP510WS: ON
OFF, ON
DEINTERLACE ON OFF, ON
BEEP ON OFF, ON
OPTIONS(2)
OFF TIMER OFF OFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00
STANDBY MODE NORMAL NORMAL, POWER-SAVING
AUTO POWER ON(AC) OFF OFF, ON
AUTO POWER ON(COMP1) OFF OFF, ON
AUTO POWER OFF OFF OFF, 0:05, 0:10, 0:20, 0:30
DEFAULT SOURCE SELECT LAST
LAST, AUTO, COMPUTER1, COMPUTER2(DIGITAL)* 1 ,
COMPUTER2(ANALOG), VIDEO, S-VIDEO
INFO.
USAGE TIME
LAMP LIFE REMAINING
LAMP HOURS USED
FILTER HOURS USED
TOTAL CARBON SAVINGS
SOURCE
SOURCE NAME
SOURCE INDEX
HORIZONTAL FREQUENCY
VERTICAL FREQUENCY
SIGNAL TYPE
VIDEO TYPE
SYNC TYPE
SYNC POLARITY
SCAN TYPE
WIRED LAN* 4
PROJECTOR NAME
IP ADDRESS
SUBNET MASK
GATEWAY
MAC ADDRESS
VERSION
PRODUCT
SERIAL NUMBER
FIRMWARE
DATA
CONTROL ID (when [CONTROL
ID] is set)
RESET
CURRENT SIGNAL
ALL DATA
NETWORK SETTINGS*
4
CLEAR LAMP HOURS
CLEAR FILTER HOURS
* The asterisk (*) indicates that the default setting varies depending on the signal.
*1: COMPUTER 2(DIGITAL) is not available on NP405 and NP305. The source for the computer 2 analog signal is displayed as “COMPUTER2” on
NP405 and NP305.
*2: DYNAMIC CONTRAST is available on NP410 and NP310 only.
*3: DIGITAL ZOOM is available on NP610S and NP510WS only.
*4: Wired LAN is not supported by NP405 and NP305.