NEC NP410 - Manual (Page 94)

85
6. Maintenance
2. Remove the lamp housing.
(1) Loosen the two screws securing the lamp housing until the phillips screwdriver goes into a freewheeling condi-
tion.
• The two screws are not removable.
• There is an interlock on this case to prevent the risk of electrical shock. Do not attempt to circumvent this
interlock.
(2) Remove the lamp housing by holding it.
FOCU S FOCU S
Interlock
1. Remove the lamp cover.
(1) Loosen the lamp cover screw
• The lamp cover screw is not removable.
(2) Push and slide the lamp cover off.
MEN U
STATUS LAMP AUTOADJ
.
SOURCE
FOCUS
MEN U
STATUS LAMP AUTOADJ
.
SOURCE
FOCUS
CAUTION:
Make sure that the lamp housing is cool
enough to before removing it.