NEC NP410 - Manual (Page 101)

92
7. Appendix
Model Number NP610S/NP510WS
Optical NP610S NP510WS
LCD Panel 0.63 inch LCD with Micro Lens Array
(Aspect Ratio 4:3) 0.59 inch LCD with Micro Lens Array
(Aspect Ratio 16:10)
Resolution 1024 × 768 pixels* 1 1280 × 800 pixels* 1
Lens Fixed zoom and manual focus
Digital Zoom Ratio= 1.2
F2.3 f= 9.7 mm
Lamp 230W AC (170W in ECO Mode)
Light Output* 2 * 3 2600 lumens (approx. 70% in ECO Mode) 2100 lumens (approx. 70% in ECO Mode)
Contrast Ratio* 3
(full white: full black)
600:1
Image Size (Diagonal) 60"–110"/ 1.52 m–2.79 m 57"–104"/1.45 m–2.64 m
Projection Distance 35"–66"/ 0.9 m–1.7 m
Projection Angle 29.1°–29.4°
*1 Effective pixels are more than 99.99%.
*2 This is the light output value (lumens) when the [PRESET] mode is set to [HIGH-BRIGHT]. If any
other mode is selected as the [PRESET] mode, the light output value may drop slightly.
*3 Compliance with ISO21118-2005
Electrical
Inputs 1 RGB/Component (D-Sub 15 P), 1 RGB (Digital/Analog, DVI-I 29 P, HDCP* 4 supported),
1 S-Video (DIN 4 P), 1 Video (RCA), 1 (L/R) RCA Audio, 2 Stereo Mini Audio
Outputs 1 RGB (D-Sub 15P), 1 Stereo Mini Audio
PC Control 1 PC Control Port (D-Sub 9P)
Wired LAN Port RJ-45
External Control RS232, IR, Wired LAN
Color Reproduction 16.7 million colors simultaneously, Full color
Compatible Signals* 5 Analog: VGA/SVGA/XGA/WXGA/WXGA+/SXGA/SXGA+/UXGA
480i/480p/576i/576p/720p/1080i
Digital: VGA/SVGA/XGA/WXGA/SXGA
Video Bandwidth RGB: 80 MHz (Max.)
Horizontal Resolution 540 TV lines: NTSC/NTSC4.43/PAL/PAL-M/PAL-N/PAL60
300 TV lines: SECAM
Scan Rate Horizontal: 15 kHz to 100 kHz (RGB: 24 kHz or over)
Vertical: 50 Hz to 120 Hz
Sync Compatibility Separate Sync / Composite Sync / Sync on G
Built-in Speaker 7W (monaural)
Power Requirement NP610S: 100–240V AC, 50/60Hz
NP610SG: 200–240V AC, 50/60Hz NP510WS: 100–240V AC, 50/60Hz
NP510WSG: 200–240V AC, 50/60Hz
Input Current NP610S: 3.8–1.5A
NP610SG: 1.8A NP510WS: 3.8–1.5A
NP510WSG: 1.8A
Power Consumption 312W(100-130V AC)/294W(200-240V AC) in OFF for ECO MODE/237W(100-130V AC)/228W(200-240V
AC) in ON for ECO MODE/10W in NORMAL Mode for STANDBY Mode/0.6W(100-130V AC)/0.7W(200-
240V AC) in POWER-SAVING Mode for STANDBY MODE
*4 What is HDCP/HDCP technology?
HDCP is an acronym for High-bandwidth Digital Content Protection. High bandwidth Digital Content
Protection (HDCP) is a system for preventing illegal copying of video data sent over a Digital Visual
Interface (DVI).
If you are unable to view material via the DVI input, this does not necessarily mean the projector
is not functioning properly. With the implementation of HDCP, there may be cases in which certain
content is protected with HDCP and might not be displayed due to the decision/intention of the HDCP
community (Digital Content Protection, LLC).
*5 An image with higher or lower resolution than the projector’s native resolution (NP610S: 1024 × 768 /
NP510WS: 1280 × 800) will be displayed with Advanced AccuBlend.