Nortel Networks NORSTAR VOICE MAIL 4.0 FAX P0886629 - Manual (Page 64)

64 Appendix B: Dialing Translation
FAX Set Up and Operation Guide P0886629 Issue 1.0
Finding an entry in the Dialing Translation Table
For convenience, the System Coordinator can locate a specific entry in the Dialing
Translation Table. The Input value must be entered in order to find the entry.
To find a specific entry in the Dialing Translation Table:
1. Press
ƒ · ° ‹.
2. Enter the System Coordinator Mailbox number and
password and press OK.
3. Press
° °.
4. Press TABLE. If Centrex is installed on your Norstar
system, QUIT is replaced by NEXT.
5. Press CHNG.
6. Press OTHR.
inval* outval* is an example of a Table entry.
7. Press FIND.
8. Enter the Input value of the entry you wish to find
and press OK.
9. Repeat steps 6 through 8 to find other entries in the
Dialing Translation Table.
Note: The inval* outval* is an example of a
Table entry. The * character shown after a
value signifies any digits in the telephone
number remaining to be dialed. Norstar Voice
Mail automatically adds the * character after
every Input and Output value.
10. Press
® to end this programming session.
Log:
QUIT RETRY
Admin
MBOX AA OTHR
Dialing
PARM
QUIT
Dial table
ADD
QUIT
inval * outval *
NEXT
inval * outval *
CHNG DEL
In:
RETRY OK
inval * outval *
NEXT