Nortel Networks NORSTAR VOICE MAIL 4.0 FAX P0886629 - Manual (Page 66)

66 Appendix B: Dialing Translation
FAX Set Up and Operation Guide P0886629 Issue 1.0
Deleting a Dialing Translation Table entry
The System Coordinator can delete an entry in the Dialing Translation Table at any
time. To locate the entry that you wish to delete, refer to
"Reviewing the entries in
the Dialing Translation Table" on page 63 or "Finding an entry in the Dialing
Translation Table" on page 64.
To delete an entry in the Dialing Translation Table:
1. Press
ƒ · ° ‹.
2. Enter the System Coordinator Mailbox number and
password and press OK.
3. Press
° °.
4. Press TABLE. If Centrex is installed on your Norstar
system, QUIT is replaced by NEXT.
5. Press CHNG.
6. Press OTHR. The inval* outval* is an example
of a Table entry. The * character shown after a
value signifies any digits in the telephone number
remaining to be dialed. Norstar Voice Mail
automatically adds the * character after every Input
and Output value
7. Press DEL.
8. This transient display shows Deleted and then the
display changes to show the next entry in the table:
9. Repeat steps 6 through 8 for every entry you want to
delete.
The inval2* outval2* is an example of the next
Dialing Translation Table entry.
10. Press
® to end this programming session.
Log:
QUIT RETRY
Admin
MBOX AA OTHR
Dialing
PARM
QUIT
Dial table
ADD
QUIT
inval * outval *
NEXT
inval * outval *
CHNG FIND
Deleted
inval2 * outval2 *
NEXT