NEC M350X User Manual
NEC Projectors
Advertising
Portable Projector
M350X/M300X/M260X/M230X/M420X/
M420XV/M300W/M260W/M350XS/
M300XS/M260XS/M300WS/M260WS
User’s Manual
The M350X, M230X, M420X, M420XV, M350XS, M260XS, and
M260WS are not distributed in North America.
Model No.
NP-M350X, NP-M300X, NP-M260X, NP-M230X, NP-M420X, NP-
M420XV, NP-M300W, NP-M260W, NP-M350XS, NP-M300XS, NP-
M260XS, NP-M300WS, NP-M260WS
[M350X/M300X/M260X/M230X/M300W/M260W]
[M350XS/M300XS/M260XS/M300WS/M260WS]
[M420X/M420XV]
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Front cover
- Table of Contents
- Important Information
- 1. Introduction
- 2. Projecting an Image (Basic Operation)
- (1) Flow of Projecting an Image
- (2) Connecting Your Computer/Connecting the Power Cord
- (3) Turning on the Projector
- (4) Selecting a Source
- (5) Adjusting the Picture Size and Position
- (6) Correcting Keystone Distortion Manually
- (7) Optimizing Computer Signal Automatically
- (8) Turning Up or Down Volume (not available on M420XV)
- (9) Turning off the Projector
- (10) After Use
- 3. Convenient Features
- (1) Turning off the Image and Sound
- (2) Freezing a Picture
- (3) Enlarging a Picture
- (4) Changing Eco Mode/Checking Energy-Saving Effect
- (5) Preventing the Unauthorized Use of the Projector [SECURITY]
- (6) Using the Computer Cable (VGA) to Operate the Projector (Virtual Remote Tool)
- (7) Operating Your Computer’s Mouse Functions from the Projector’s Remote Control via the USB Cable (Remote Mouse Function)
- (8) Projecting Your Computer’s Screen Image from the Projector via the USB Cable (USB Display)
- (9) Controlling the Projector by Using an HTTP Browser
- (10) Controlling the Projector over a LAN (PC Control Utility Pro 4)
- (11) Projecting Your Computer’s Screen Image from the Projector over a LAN (Image Express Utility Lite)
- (12) Projecting an Image from an Angle (Geometric Correction Tool in Image Express Utility Lite)
- 4. Using the Viewer
- 5. Using On-Screen Menu
- 6. Installation and Connections
- 7. Maintenance
- 8. Appendix