NEC M350X User Manual
Page 45
35
3. Convenient Features
Using the Computer Cable (VGA) to Operate the Pro-
jector (Virtual Remote Tool)
Using the utility software “Virtual Remote Tool” included on the companion NEC Projector CD-ROM, Virtual Remote
screen (Remote Control Window or toolbar) can be displayed on your computer screen.
This will help you perform operations such as projector’s power on or off and signal selection via the computer cable
(VGA), serial cable, or LAN connection. Only via serial or LAN connection it is also used to send an image to the
projector and register it as the logo data of the projector. After registering it, you can lock the logo to prevent it from
changing.
Control Functions
Power On/Off, signal selection, picture freeze, picture mute, audio mute*, Logo transfer to the projector, and remote
control operation on your PC.
NOTE:
* Audio mute function is not available on M420XV.
Virtual Remote screen
Remote Control Window
Toolbar
This section provides an outline of preparation for use of Virtual Remote Tool.
For information on how to use Virtual Remote Tool, see Help of Virtual Remote Tool. (
→ page
)
Step 1: Install Virtual Remote Tool on the computer. (
→ page
)
Step 2: Connect the projector to the computer. (
Step 3: Start Virtual Remote Tool. (
TIP:
• Virtual Remote Tool can be used with a LAN and a serial connection.
• For update information on Virtual Remote Tool, visit our website: