NEC M350X User Manual
Page 94
84
5. Using On-Screen Menu
Turning ON/OFF Control ID [ID DISPLAY]
ID DISPLAY ����������� This option turns on or off the ID number which is displayed when the ID SET button on the remote control
is pressed�
Turning On / Off Eco Message [ECO MESSAGE]
This option turns on or off the following messages when the projector is turned on.
The Eco Message prompts the user to save energy. When [OFF] is selected for [ECO MODE], you will get a message
to prompt you to select [AUTO ECO], [ECO1], or [ECO2]* for [ECO MODE].
When [AUTO ECO], [ECO1], or [ECO2]* is selected for [ECO MODE]
NOTE: * [ECO2] is available on M300X, M260X, and M260XS only.
To close the message, press any one of the buttons. The message will disappear if no button operation is done for
30 seconds.
When [OFF] is selected for [ECO MODE]
Pressing the ENTER button will display the [ECO MODE] screen. (
To close the message, press the EXIT button.
Selecting Menu Display Time [DISPLAY TIME]
This option allows you to select how long the projector waits after the last touch of a button to turn off the menu. The
preset choices are [MANUAL], [AUTO 5 SEC], [AUTO 15 SEC], and [AUTO 45 SEC]. The [AUTO 45 SEC] is the fac-
tory preset.
Selecting a Color or Logo for Background [BACKGROUND]
Use this feature to display a blue/black screen or logo when no signal is available. The default background is
[BLUE].
NOTE:
• If the [LOGO] item is selected for [BACKGROUND] with the [NETWORK] or [USB DISPLAY] source selected, the [BLUE] item will
be selected regardless of its selection.
• When [SOURCE DISPLAY] is turned on, the no-signal guidance prompting you to check for an available input will be displayed
at the center of the screen regardless of its selection.
• Your setting will not be affected even when [RESET] is done from the menu.
Selecting Interval Time for Filter Message [FILTER MESSAGE]
This option allows you to select the time preference between displaying the message for cleaning the filters. Clean
the filter when you get the message “PLEASE CLEAN FILTER.” (
Five options are available: OFF, 100[H], 500[H], 1000[H], 2000[H]
The default setting is [OFF].
NOTE: Your setting will not be affected even when [RESET] is done from the menu.