NEC M350X User Manual
Page 101
91
5. Using On-Screen Menu
Setting up the Projector for a Wired LAN Connection [WIRED LAN]
Important
• Consult with your network administrator about these settings.
• When using a wired LAN connection, connect a LAN cable (Ethernet cable) to the LAN port (RJ-45) of the projec-
tor. (
→ page
)
TIP: The network settings you make will not be affected even when [RESET] is done from the menu.
[WIRED LAN]
[DISABLE]
Wired LAN connection will be turned off.
[ENABLE]
Wired LAN connection will be turned on.
[SETTINGS]
[DHCP]
ON ��������������������������IP address, subnet mask, and gateway will
be automatically assigned to the projector
from your DHCP server�
OFF ������������������������� Specify IP address, subnet mask, and gate-
way assigned by your network administra-
tor�
[IP ADDRESS]
Set your IP address of the network connected to the
projector.
[SUBNET MASK]
Set your subnet mask number of the network connected
to the projector.
[GATEWAY]
Set the default gateway of the network connected to the
projector.
[AUTO DNS]
ON �������������������������� DHCP server will automatically assign IP
address of DNS server connected to the
projector�
OFF ������������������������� Set your IP address of DNS server connected
to the projector�