2) projecting images stored in a usb memory device, Projecting images stored in a usb memory device – NEC M350X User Manual
Page 70
60
4. Using the Viewer
❷ Projecting images stored in a USB memory device
This section explains the basic operation of the Viewer.
The explanation provides the operational procedure when the Viewer toolbar (
→ page
) is set to the factory de-
fault.
- Starting the Viewer .......................................................................below
- Removing the USB memory from the projector ....................... page
- Exiting the Viewer..................................................................... page
Preparation: Before starting the Viewer, store images to the USB memory using your computer.
WIRELESS
WIRELESS
Starting the Viewer
1. Turn on the projector. (
2. Insert the USB memory into the USB port of the projec-
tor.
• Do not remove the USB memory from the projector while
it’s LED flashes. Doing so may corrupt the data.
3. Press the SOURCE button on the projector cabinet.
The Viewer start screen will be displayed.
• Press the VIEWER button on the remote control.