Lifebreath 200ERVD - Manual

For Models:
200ERV
ControlAir 15
200ERVD
ControlAir 15
500ERV
ControlAir 15
700ERV
Analog Controls
1200ERV
Analog Controls
OPERATION AND
INSTALLATION MANUAL
®
C L E A N • F R E S H • A I R
IMPORTANT - PLEASE READ THIS
MANUAL BEFORE INSTALLING UNIT
CAUTION
Before installation, careful consideration must be
given to how the system will operate if connected to
any other piece of mechanical equipment, i.e. a forced
air furnace or air handler, operating at a higher static.
After installation, the compatibility of the two pieces of
equipment must be confirmed, by measuring the
airflow’s of the Energy Recovery Ventilator (ERV), by
using the balancing procedure in this manual
It is always important to assess how the operation of
any Energy Recovery Ventilator may interact with
vented combustion equipment (ie. Gas Furnaces, Oil
Furnaces, Wood Stoves, etc.)
NEVER install an Energy Recovery Ventilator in a situ-
ation where its normal operation, lack of operation or
partial failure may result in the backdrafting or improper
functioning of vented combustion equipment!!!
Contains
ControlAir 15
* LEAVE FOR HOMEOWNER
NOTE: Due to ongoing research and product development, specifications,
ratings and dimensions are subject to change without notice.
TI-83C-NE
0007
Installing Contractor
Telephone / Contact
Serial Number
Installation Date Model
TO BE COMPLETED BY CONTRACTOR AFTER INSTALLATION