Lifebreath 200ERVD - Manual (Page 9)

9
Model 700
ERV
®
C L E A N • F R E S H • A I R
SPECIFICATIONS
LATENT RECOVERY (MOISTURE) TRANSFER CORES
Modular (2 section) enthalpic (moisture) transfer cores arranged for
efficient cross-flow ventilation.
MOTORS
Two PSC, 3 speed single shafted, 120 VAC, 2.75 Amps each (5.5 total
on high speed). HP - 1/10, 1625 RPM. Watts - total on high speed - 648.
FILTERS
Washable air filters in exhaust and supply air streams.
BLOWERS
Centrifugal type rated at 700 CFM (329 L/s) free air delivery. Each air
stream has one single shafted motor driving a centrifugal blower.
CONNECTION DUCT SIZES
Four - 14" x 8" (356 mm x 200 mm)
MOUNTING
Unit to be set on support brackets hung by threaded rod type
apparatus (brackets and rods not provided).
CASE
20 gauge prepainted galvanized steel (G60) for superior corrosion
resistance. Insulated with foil faced insulation where required to pre-
vent exterior condensation.
CONTROLS
Illuminated power switch, 3 speed blower control, low voltage (24
VAC) terminals for connection of remote controls.
WEIGHT 142 lbs (64.4 kg) SHIPPING WEIGHT 167 lbs. (75.8 kg)
All units conform to CSA and UL standards.
WARRANTY
Units carry a 5 year warranty on the energy recovery cores and
2 year replacement parts warranty.
It is recommended for regions where the temperature
does not fall below 25°F (-4°C).
DATE:
_________________________________________
PROJECT:
______________________________________
MECHANICAL CONTRACTOR:
__________________________
TI-131
9807
511 McCormick Blvd.
London, ON N5W 4C8
Phone: (519) 457-1904
Fax: (519) 457-1676
E mail: nutech@lifebreath .com
AIRFLOWS (Each Air Stream)
MODEL 700FD, 700DD
423 (900)
378 (800)
329 (700)
282 (600)
235 (500)
190 (400)
143 (300)
94 (200)
42 (100)
AIRFLOW L/s (CFM)
25 (.1) 50 (.2) 75 (.3) 100 (.4) 125 (.5) 150 (.6) 175 (.7)
EXTERNAL STATIC PRESSURE IN PASCALS (IN. W.C.)
TOTAL CURRENT DRAW (AMPS) @ 120 VAC
5.5 HIGH
4.7 LOW
70%
60%
50%
143
(300)
190
(400)
235
(500)
282
(600)
329
(700˚)
TEMPERATURE EFFECTIVENESS
AIRFLOW IN L/s (CFM)
NOTE: Exhaust Relative Humidity (RH) at 40%
EFFECTIVENESS
HIGH SPEED
MED SPEED
LOW SPEED
5.0 MED
P E R F O R M A N C E
29 5/8" (753 mm)
8"
(200 mm)
FRONT VIEW
625 mm
(24 5/8 ")
28 3/4"
(730 mm)
14"
(356 mm)
8 1/4"
(210 mm)
INLET SIDE
DIMENSIONS 700
inches (mm)
8"
(200 mm)
28 3/4"
(730 mm)
14"
(356 mm)
6 1/4"
(159 mm)
MOUNTING POINTS
CONTROLS
DISCHARGE SIDE
EXHAUST AIR
TO OUTSIDE
EXHAUST AIR
FROM BUILDING
SUPPLY AIR
TO BUILDING
SUPPLY AIR
FROM OUTSIDE
NOTE:
Service clearance
is 30 in. (760 mm)
HEAT RECOVERY VENTILATORS (HRVs)
®
6 1/2"
(165 mm)
6 1/2"
(165 mm)