Speed selection and controls, Optional remote controls – Lifebreath 200ERVD User Manual

Page 15

Advertising
background image

15

Model 700 and 1200 ERV only

These models are equipped with a 3 speed control, low
medium and high, as well as a lighted on/off switch and a
4 screw terminal strip. The terminal strip can be used to
hook up any low voltage device which will then jump the
unit to high speed from whatever setting the speed control
was on. The terminal strip can also be wired to allow the
unit to be turned off from a remote location as well as

from high to low from a remote location. To wire the unit in
this configuration you would need two electrical on/off
switches to be installed at the remote location into a dou-
ble gang electrical enclosure or side by side. One should
be labeled on/off and the other should be labeled
high/low.

Off

10

20

30

40

50

60

DEHUMIDISTAT VENTILATION

CONTROL (DVC)

PART NO. 99-116

•Turns ERV ON/OFF

• Dehumidistat increases

ventilation when required

Speed Selection and Controls

DEHUMIDISTAT

PART NO. 99-130W

•Provides high speed

ventilation when humidity

level exceeds setting

60 MINUTE CRANK TIMER

PART NO. 99-101

•Provides high speed

ventilation for 60 minutes

This style of remote switching began
approximately July 1997

ON

OFF

LOW

HIGH

ON

OFF

LOW

HIGH

Optional Remote Controls

ON/OFF/LOW/HIGH

SWITCHING FROM REMOTE LOCATION

LOW/HIGH ONLY

ON/OFF ONLY

ON/OFF SWITCH

3 SPEED CONTROL

*Supplied and Installed by Contractor*

COMMON

HIGH

ON/OFF

RED BLACK ORANGE

Advertising
This manual is related to the following products: