Lifebreath 200ERVD - Manual (Page 26)

26
Various Installation Types
Figure 7A
Saddle Installation
Hang unit with suspended rods
and "U" channel members.
*NOTE: When installing your ERV,
flexible duct connectors should
be installed between the ERV
and the galvanized ductwork.
Threaded
rod and U channel
(Supplied by others)
Vibration Isolators
(Supplied by others)
Figure 7B
Curb Mounted
Mount unit on wooden or metal
curb assembly. Unit must be raised
an adequate height for installation
and slope of drain lines.
Curb is wood or metal
(Supplied by others)
May be anchored to
floor,leaving space
for drain connections
Vibration Isolators
(Supplied by others)
PVC Support Straps
(Supplied by others)
Figure 7C
Suspended
Unit Suspended using
Polyester reinforced PVC support straps.