Lifebreath 200ERVD - Manual (Page 13)

13
To select mode of operation for ControlAir 15
Press and hold the fan selection button on the Control Pad. After 5 seconds the control will begin
to cycle each mode holding each for 2 seconds. Release the button when the desired mode of
operation is reached.
Modes of Operation LED Indication
OFF No LED’s illuminated ERV is off, no controls will initiate
operation.
Standby / On S teady Green LED and Yellow LED to indicate speed ERV
will run at speed selected in ventilation mode. Standby mode is
indicated by no speed indicator illuminated. Optional remote
controls will override standby or selected speed into high speed.
20 On / 40 Off Flashing Green LED and Yellow LED to indicate speed.
ERV will operate in ventilation mode at speed selected for
20 minutes and OFF for 40 minutes.
Recirculation Steady Red LED and Yellow LED to indicate Speed. ERV
*Note: Not available on all HRVs will operate in recirculate mode at the selected speed. Optional
remote controls will override unit into high speed ventilate mode.
To select speed
Momentarily press fan selection button and release. ERV will move into next speed. OFF is indi-
cated by no yellow LED illuminated. Speed 1 is the first yellow LED. Speed five is indicated by a
flashing speed 4 LED.
Automatic Defrost * Not on all Erv’s
During cold outdoor conditions the ERV will occasionally go into an automatic defrost function, which
will prevent ice from forming on the core. Defrost is indicated by a flashing Red LED indicator.