Adding expression to your playing (velocity), Oct up/down buttons (p. 18), Pitch bend/modulation lever (p. 18) – Roland SH-201 User Manual

Page 18

Advertising
background image

18

Playing sounds

The SH-201’s keyboard produces volume (or brightness) changes in response to your playing dynamics.

The strength with which you play the keyboard is called the “key velocity.”

* If you want to change the way in which the sound responds to your keyboard playing velocity, adjust the

FILTER & AMP

parameters

(p. 61)

LEVEL VELOCITY SENS

(volume) and

CUTOFF VELOCITY SENS

(brightness).

fig.Bender.e

• Moving the lever toward the left lowers the pitch of the notes

you’re playing (“Pitch Bend”); moving the lever toward the
right raises the pitch.

• Pushing the lever away from yourself adds vibrato

(“Modulation”) to the notes you’re playing.

• Moving the lever to left or right while pushing it away from

yourself applies pitch bend and modulation at the same time.

Pitch bend range

Moving the lever all the way to the left (or right) lowers (or raises) the pitch by a whole step (two semitones).

* If you want to increase or decrease the range of change, refer to

Setting the PITCH BEND RANGE

(p. 71).

Modulation speed and shape

You can use the LFO 2 parameters SHAPE (p. 40) and RATE (p. 41) to vary the speed and shape of the vibrato
that is applied when you move the lever away from yourself.

You can shift the range of the keyboard in one-octave steps, over a maximum of three octaves upward or
downward.

For example, if you’re using your right hand to play a synth bass sound, shifting the keyboard pitch down by one
octave will make it more convenient to play the keyboard.

fig.OCT-buttons

• Press the OCT UP button to shift the pitch upward. Each press shifts the keyboard one octave upward.

• Press the OCT DOWN button to shift the pitch downward. Each press shifts the keyboard one octave downward.

The OCT UP button’s indicator will light if the keyboard pitch range has been raised above the normal range.
The OCT DOWN button’s indicator will light if the range has been lowered.

You can return to the normal range by simultaneously pressing the OCT UP and OCT DOWN buttons. (The
indicators for both buttons go out.)

Adding expression to your playing (Velocity)

Varying the pitch of the notes you play/
Adding vibrato (Pitch Bend/Modulation lever)

Shifting the pitch range of the keyboard (OCT UP/DOWN)

Modulation effect

Apply

modulation

Pitch Bend effect

Raise

the pitch

Lower

the pitch

SH-201_r_e.book 18 ページ 2006年4月27日 木曜日 午前11時28分

Advertising