Roland SH-201 - Manual (Page 34)

34
Creating sounds
fig.FILTER-TYPE-button
This button selects the type of filter that is applied to the waveform.
Press the button so the indicator for the desired filter is lit.
Pressing the button successively cycles you through the settings in this order: LPF –> HPF –> BPF –> BYPASS
–> LPF –> ... .
Filter types
fig.FilterTypes.e
• LPF (Low Pass Filter)
This cuts the frequency region above the cutoff frequency, making the sound more mellow.
This is the most commonly used filter.
• HPF (High Pass Filter)
This cuts the frequency region below the cutoff frequency, emphasizing the high-frequency region.
You can use this when you want to create percussion instrument sounds with a distinctive high range.
• BPF (Band Pass Filter)
This passes only the frequencies in the region of the cutoff frequency, and cuts the remaining frequency regions.
You can use this to create distinctive sounds.
If you select this filter type when you’ve selected “NOISE” as the OSC waveform, you will hear only a limited
region of the frequency components of the noise waveform; this lets you play notes that have a sense of pitch.
• BYPASS
Bypasses the filter. The unfiltered waveform of the oscillator will be output.
Specifying the brightness and thickness of the sound
(FILTER)
TYPE button
frequency
LPF
(Low Pass Filter)
partials
which
are cut
level
frequency
BPF
(Band Pass Filter)
partials
which
are cut partials
which
are cut
level
frequency
HPF
(High Pass Filter)
partials
which
are cut
level
SH-201_r_e.book 34 ページ ２００６年４月２７日 木曜日 午前１１時２８分