Roland SH-201 - Manual (Page 28)

28
Creating sounds
The OSC (oscillator) section produces the waveform that is the basis of the sound.
Selecting a waveform will also determine the pitch.
The SH-201 has two oscillators; OSC 1 and OSC 2.
You can use these separately, or together to create rich or complex sounds.
For details on how you can combine the two oscillators, refer to Combining waveforms to create rich or
metallic sounds (MIX/MOD) (p. 32).
fig.OSC-buttons
Use these buttons to specify whether you’re making settings for OSC 1 or OSC 2.
Press the button for the desired oscillator; it will light.
fig.WAVE-buttons
Use these buttons to select the waveform that is the basis of the sound. One of the indicators will light to indicate
the waveform that’s selected. Press the right button to move clockwise through the selections, or the left button
to move counterclockwise.
Specifying the waveform and pitch (OSC)
OSC 1 (oscillator 1) button/OSC 2 (oscillator 2) button
WAVE buttons
Lit indicator Description
(Sawtooth wave)
This waveform contains the fundamental frequency (sine wave) plus all of its integer mul-
tiples (overtones) at a fixed proportion.
(Square wave) This waveform contains the fundamental frequency (sine wave) plus its odd-numbered in-
teger multiples (overtones) at a fixed proportion.
(Asymmetrical square (pulse) wave)
The overtone structure will change significantly depending on the width of the upper por-
tion (pulse width, p. 30) of the waveform.
(Triangle wave)
This waveform contains the fundamental frequency (sine wave) plus its even-numbered in-
teger multiples (overtones) at a fixed proportion.
(Sine wave) A waveform with no overtones (harmonics). It consists of only one single frequency.
NOISE A waveform containing all frequencies. Use this for percussion sounds or sound effects.
FB OSC (Feedback oscillator) Produces a tone containing high overtones, similar to feedback on a guitar. Ideal for creat-
ing aggressive, cutting sounds.
SUPER SAW A sound resembling seven sawtooth waves played simultaneously. Pitch-shifted sounds
are added to a core sound. Ideal for creating string sounds and other rich tones.
EXT IN (External In) This plays the sound from the audio source connected to the rear panel INPUT jacks. Refer
to p. 52.
* There will be no sound if nothing is connected to the INPUT jacks or if you have turned
down the volume of the connected source or the INPUT VOL (p. 49).
SH-201_r_e.book 28 ページ ２００６年４月２７日 木曜日 午前１１時２８分