Roland SH-201 - Manual (Page 54)

54
Using the SH-201 together with your
computer or another sound module
You can use the SH-201 in more sophisticated ways by connecting it to your computer or to other MIDI
equipment.
If you’ve connected the SH-201 to your computer via USB, you’ll be able to record the sound of the SH-201 or the
sound from a device connected to the SH-201’s INPUT jacks into your DAW (Digital Audio Workstation)
software on the computer, and to play back the sound from the DAW on a speaker system connected to the
OUTPUT jacks of the SH-201. (This is referred to as “USB audio” functionality.)
You can also use your sequence software to record the performance data (MIDI data) from the SH-201. (This is
referred to as “USB MIDI” functionality.)
* You can use USB audio and USB MIDI at the same time.
Installing the USB driver in your computer
In order to use the SH-201 from your computer as a USB device, you must first install the USB driver. The USB
driver is provided on the included “SH-201 Editor CD.”
• Windows users
Refer to “Readme_E.txt” on the “SH-201 Editor CD.”
• Macintosh users
Refer to “ReadMe(English).txt” on the “SH-201 Editor CD.”
Making connections
Use a USB cable (sold separately) to connect the SH-201 to your computer.
fig.Connect-USB.e
Using your computer to record sound or performance
data from the SH-201 (USB)
USB connector
USB cable
Windows Macintosh
SH-201_r_e.book 54 ページ ２００６年４月２７日 木曜日 午前１１時２８分