To p. 52 – Roland SH-201 User Manual
Page 52
52
Performing with sound from your digital audio player, etc. (EXT IN)
fig.WAVE-EXTIN
Use the WAVE buttons to select “EXT IN” as the WAVE for OSC 1 or OSC 2 (p. 28).
When you play the keyboard, you will hear the sound from the audio source connected to the INPUT jacks
according to the settings of FILTER (p. 34), AMP (p. 38), LFO (p. 40), and EFFECTS (p. 44) in the same way as for
an OSC waveform.
You can use the arpeggiator (p. 22) to play this sound rhythmically.
Signal flow of the sound heard when you play or release the keyboard
* The settings of the PITCH knob, DETUNE knob, PW/FEEDBACK knob, and PITCH ENV sliders are ignored for an
oscillator whose WAVE is set to “EXT IN.”
How the sound is produced
• The key you press will not change the pitch of the sound. The sound from the connected audio source device
will be heard at its original pitch regardless of the key you press.
• If you press more than one key, the sound from the connected device will be layered according to the number of
keys you’re pressing.
Since the sound may distort if you press a larger number of keys, we recommend that you turn on the Solo
function (p. 19).
• When using the OSC EXT IN setting to play the sound of an external audio source, the sound you hear will be
mono even if the audio source connected to the INPUT jack is stereo.
For some settings, such as when the AMP LEVEL is lowered or when the FILTER CUTOFF is at the lowest
setting, you might not hear any sound when you play the keyboard.
will not be heard when you take your hand off the keyboard until the release time has elapsed. We recommend
that you set the AMP ENV release time to a short value.
Using the keyboard to play sound from an external
source (WAVE - EXT IN)
Sound heard when you
release the keyboard
Sound heard when you
play the keyboard
Digital audio player,
CD player, etc.
AUDIO FILTER
INPUT
jacks
OUTPUT
jacks
OSC
SH-201
MIX/MOD, FILTER,
AMP, LFO, EFFECTS
SH-201_r_e.book 52 ページ ２００６年４月２７日 木曜日 午前１１時２８分