Ricoh Aficio Copy Machine 180 - Manual (Page 198)

43
6. Troubleshooting
Error & Status Messages on the Operation
Panel
Error & Status Messages on the Operation Panel
Messages Description Resolution
Add Toner The printer is out of toner. Prepare a new toner car-
tridge.
Call Service
SC_XXX
The Service Code or SC num-
ber identifies the failure. Call your sales or service
representative.
Call Service
Power Off On
Communicate error from en-
gine to controller. Turn the machine off and
then on again to restart.
Cannot Output
To Selected Tray
The printer cannot output to
specified tray with specified
paper size. Specify correct the paper
size, or select the other tray
on the printer driver.
Close Right
Cover
The right cover is open. Close the right cover.
Close R-Cover
Paper
The right cover of the paper
tray is open. Close the right cover of the
paper tray.
Close Upper
Right Cover
The cover of the output inter-
nal 1bin tray is open. Close the cover of the output
internal 1bin tray.
Energy Saver 1 In Energy Save Mode level 1. Press { Energy Saver } for the
machine to get ready.
Energy Saver 2 In Energy Save Mode level 2. Press the operation switch to
turn the power on.
Error X System error
X: number 1 to 7
Call your sales or service
representative.
Form Feeding... Doing form feed. Wait for a while.
Load Tray 1
xx
Tray 1 is out of paper.
xx : Paper Size
Load paper of the indicated pa-
per size into the paper tray 1.
Load Tray 2
xx
Tray 2 is out of paper.
xx : Paper Size
Load paper of the indicated pa-
per size into the paper tray 2.
Load Tray 3
xx
Tray 3 is out of paper.
xx : Paper Size
Load paper of the indicated pa-
per size into the paper tray 3.