When printing postscript from windows, When print it with netware, Configuration of form feed – Ricoh Aficio Copy Machine 180 User Manual
Page 316: Printing after resetting the printer
Precautions
81
5
When Printing PostScript from Windows
When print PostScript from Windows, refer to the Operating Instructions that
comes with the optional PostScript 3, and configure to use the Network Interface
Board with your printer driver.
When print it with NetWare
Configuration of form feed
You should not configure of form feed on NetWare. You do not need to config-
ure on NetWare in order to control newpage with printer driver of Windows.
There is the case that cannot print it justly when you configure.
If you want to do not do form feed, configure according to OS using it as follows.
• In case of Windows 3.1x, remove a check of
[Form feed]
in
[Network Settings]
di-
alog.
• In case of Windows95/98, you remove a check of
[Form feed]
with
[Printer Set-
tings]
tab of property of printer.
Configuration of banner page
Please do not configure of banner page on NetWare.
If you want to do not add banner page, configure according to OS using it as fol-
lows.
• In case of Windows 3.1x, remove a check of
[Enable banner]
in
[Network Settings]
dialog.
• In case of Windows95/98, you remove a check of
[Enable banner]
with
[Printer
Settings]
tab of property of printer.
Printing after Resetting the Printer
After resetting the remote printer, it will be cut off from the print server for about
30-40 seconds before connecting again. Due to the NetWare specification, print
jobs may be accepted, but they will not be printed during this interval.
When using the printer as a remote printer, wait about 2 minutes after resetting
the printer before attempting to print.