Ricoh Aficio Copy Machine 180 - Manual (Page 246)

Configuring Windows 95/98
11
1
Setting Up the Printer Driver
Using Multi Direct Print to print is not possible until the printer driver is in-
stalled and the correct port selected.
Preparation
The target printer must be turned on before starting the installation process.
A
Install the printer drivers.
If the printer drivers have already been installed, you can proceed to the next
step.
Reference
For more information, refer to the Operating Instructions for your printer.
Note
❒ Any port can be selected during the installation, however, LPT1 is recom-
mended.
B
In the [Printers] window, highlight the icon of the printer you want to use
by clicking it. On the [File] menu, click [Properties] .
C
Click the [Details] tab, and then click [Add Port] .
D
In the [Add Port] box, click [Other] , and select [RICOH Multi Direct Print] by click-
ing it, and then click [OK]
The [Select Printer] dialog appears, and the printers which can print with TCP/
IP are displayed.
Limitation
❒ If PRINTER MANAGER FOR CLIENT is not installed in your computer,
printers which can print with TCP/IP are not displayed.
Note
❒ The printers which have replied to a broadcast from the computer are list-
ed here. To print to a printer that is not on this list, or to directly input the
port name, highlight
[New Printer] by clicking it, and click [Next >] , and then
input the port name with procedure
G.
E
To print using the NetBEUI protocol, click [NetBEUI] .