Preparing to use the netbeui protocol for printing – Ricoh Aficio Copy Machine 180 User Manual
Page 253
Windows NT 4.0 Configuration
18
2
Preparing to Use the NetBEUI Protocol for Printing
Follow these instructions to configure the Network Interface Board and Win-
dows NT to use the NetBEUI protocol.
Configuring the Printer
Configure your printer to use the NetBEUI protocol.
• Confirm that the NetBEUI protocol is set to be active. (The factory default is
active.)
Reference
For more information on how to make the above settings, refer to the Operat-
ing Instructions for your printer.
Configuring a Windows NT Computer
Install the NetBEUI protocol into a Windows NT computer, and enter the LAN
adapter number (Lana Number).
A
Double-click the
[Network]
icon in the
[Control Panel]
, and confirm that “Net-
BEUI Protocol” is in the
[Network protocols]
box of the
[Protocols]
tab.
Note
❒ If the NetBEUI protocol is not installed, click
[Add]
in the
[Protocols]
tab,
and install it. For more information, refer to the Windows NT online help.
B
Change the Lana Number. Click the
[Services]
tab, select the
[NetBIOS inter-
face]
of the
[Network Services]
box , and click
[Properties]
.
C
Select the Lana Number corresponding
[Nbf protocol]
of the
[Network route]
headline, and click
[Edit]
.
D
Input “0” as the Lana Number.
Note
❒ If the other protocol's Lana Number is configured with “0”, you must
change the Lana Number a number other than “0”.
E
Click
[OK]
.
F
Click
[close]
, and close the
[Network]
dialog.
G
After confirming the message for restart, click
[Yes]
.
Note
❒ When you change the Lana Number, You must restart.