Ricoh Aficio Copy Machine 180 - Manual (Page 300)

Remote Maintenance by Telnet (mshell)
65
5
Reference
For more information on the meaning of the data returned with these com-
mands, refer toP.72 “Configuring the Network Interface Board”.
Information about the Network Interface Board Configuration Settings
Use the show command to display the Network Interface Board configuration
settings.
msh> show [-p]
Note
❒ Add “-p” to the show command to have the information displayed one screen
at a time.
Reference
For more information on the meaning of the data returned with this com-
mand, refer to P.72 “Configuring the Network Interface Board”.
System Log Information
Use the syslog command to display information stored in the printer's system
log.
msh> syslog
Reference
For more information on the displayed information, refer to P.75 “System Log
Information”.
SNMP
Use the snmp command to display and edit SNMP configuration settings such
as the community name.
Note
❒ You can configure from No. 1 to 10 SNMP settings.
❒ The factory default settings for No. 1 and 2 are as follows.
Number 1 2
community name public admin
IP address 0.0.0.0 0.0.0.0
access type read-only
trap off
read-write
trap off