Ricoh Aficio Copy Machine 180 - Manual (Page 276)

NetWare 4.x, 5 - Advanced Settings
41
3
C Click
[Configuration] , and in the [Printer type] box, select [Parallel] using the
dropdown menu, and then click [Communication] .
D Click
[Manual load] in the [Communication type] group, and click [OK] .
E After confirming the settings, click
[OK] .
N
Create a print server as follows.
A Select the context specified using the NIB Setup Tool (Step H-C), and in
the [Object] menu, click [Create] .
B In the
[Class of new object] box, click “Print Server” to highlight it, and
click [OK] . When you are using the NetWare 5, click “Print Sever (Non
NDPS)”.
C In the
[Print Server name] box, input the name of the print server.
Important
❒ Use the same name as that specified using the NIB Setup Tool. (Step H-
A).
D Click
[Define additional properties] to place ' mark, and click [Create] .
O
Assign the printer to the created print server as follows.
A Click
[Assignments] , and click [Add] in the [Assignments] group.
B In the
[Available objects] box, click the queue created in the step
L to high-
light it, and click [OK] .
C After confirming the settings, click
[OK] .
P
Turn the printer power off and on.
Note
❒ To confirm if the printer is configured correctly, enter as follows from the
command prompt.
F:> NLIST USER /A/B
❒ If the printer works as configured, the name of the print server appears as
an attached user.
Setting Up as Remote Printer
A
Log in to the file server as Admin.
B
Run the NIB Setup Tool.
Reference
“Running the NIB Setup Tool”
⇒
P.28.
C
Click [Property Sheet] and click [OK] .
The Browse dialog of the Network Interface Board appears.