Ricoh Aficio Copy Machine 180 - Manual (Page 281)

NetWare Configuration
46
3
K
Click the [Printer Settings] tab.
L
Remove the ' marks from the [Form feed] and the [Enable banner] check box-
es.
Note
❒ You should not check these boxes, since they should be specified using the
printer driver. If they are checked, the printer might not print correctly.
When Using the PostScript Printer Driver
Follow these steps to set up for the PostScript Printer Driver
A Click the
[PostScript] tab.
B Click
[Advanced] .
C Remove the ' marks from the
[Send CTRL+D before job] and the [Send
CTRL+D after job] check boxes.
M
Click [OK] to close the property.
Windows 3.1x
Follow these steps to set up a Windows 3.1x client.
A
Install the printer driver of the printer you want to use as “Local printer”.
Reference
For more information on installing the printer driver, refer to the Operat-
ing Instructions for your printer.
B
Double-click the [Printers] icon of [Control Panel] .
C
In the [Installed Printers] box, select the printer driver you want to use by
clicking it, and then, click [Connect] .
D
In the [Ports] box, click [LPT1] to highlight it, and click [Network] .
The Network driver dialog appears.
E
In the [Ports] box, click [LPT1] to highlight it, and in the [Resources] box, click
the queue you want to print to highlight it.
Note
❒ You should log in to the print server in order to see the print queues.
F
Click [Capture] .
The specified queue is captured to the LPT1.